F6315G-Taike Engineering Plastics_Engineering plastic

F6315G

Classification:

PA66

非阻燃

Product characteristics

Glass fiber reinforced/non flame retardant

Scope of application

Keyboard/ gear /mechanical accessories

Online Inquiry

Product Description

Physical properties	Test	Test	S.I.	S.I.
Physical properties	Standard	Condition	Unit	Data
Mechanical properties
Tensile Strength	ISO 527-2	10mm/min	MPa	109.66
tensile strain at break	ISO 527-2	10mm/min	%	4.25
Bending strength	ISO 178	2mm/min	MPa	163.06
flexural modulus	ISO 178	2mm/min	MPa	4564.01
Izod notched impact strength	ISO 180	23 ℃	kJ/m2	5.27
Rockwell hardness	ISO 2039-2	R Scale		105
Thermal performance
thermal deformation temperature	ISO 75-2	0.45MPa	℃	205
thermal deformation temperature	ISO 75-2	1.80MPa	℃	195
Electrical Performance
surface resistivity	IEC 60093		Ω · cm	/
dielectric strength	IEC 60243- 1		kV/mm	/
Other performance
Density	ISO 1183- 1		g/cm3	1.28
glass fiber	/	--	%	30
Molding shrinkage	ISO 2577	Flow	%	0.2-0.4
Molding shrinkage	ISO 2577	Transverse	%	0.8-1.0
water absorption	ISO 62	Equilibrium	%	1.7
Flammability	UL 94		/	HB
[1] The above values are typical values, I .e., laboratory average data, which are only used for product development reference and guidance, not as product standards. [2] The above performance tests are performed at a laboratory temperature of 23°C, unless otherwise specified or specified. [3] After the color matching of the product, the performance may be different from the above values.

Forming processing conditions
		Best Optimum	Set Range
melt temperature		260 ℃	250-270 ℃
Barrel temperature	Front section	275 ℃	270-280 ℃
	Middle section	265 ℃	260-270 ℃
	Rear section	250 ℃	250-260 ℃
Mold temperature		80 ℃	60-90 ℃
Molding temperature upper limit		300 ℃
Injection speed		Medium high speed
Pre-drying requirements		Dehumidification dryer; 90~110 ℃,4~6 hours
[1] The above values are typical values, I .e., laboratory average data, which are only used for product development reference and guidance, not as product standards. [2] The above performance tests are performed at a laboratory temperature of 23°C, unless otherwise specified or specified. [3] After the color matching of the product, the performance may be different from the above values. [4] The values listed may vary depending on the coloring material.
Precautions for safe use
1. Tyco Engineering Plastics Co., Ltd.: The Material Safety Data Sheet (MSDS) of the resin is provided to help customers meet their own needs and meet the requirements of local applicable health and safety regulations of customers, and is only applicable to the resin provided by the company. Various additives and processing aids, other materials used in manufacturing and finishing steps have their own safe use files, and they must be used correctly after investigation;
1. Tyco Engineering Plastics Co., Ltd.: The Material Safety Data Sheet (MSDS) of the resin is provided to help customers meet their own needs and meet the requirements of local applicable health and safety regulations of customers, and is only applicable to the resin provided by the company. Various additives and processing aids, other materials used in manufacturing and finishing steps have their own safe use files, and they must be used correctly after investigation;
2. The overall polymer processing area should be kept well ventilated. The processing process will release smoke including polymer fragments and other decomposition products. The smoke will stimulate human organs. When the temperature exceeds the temperature of the melt, polymer fragments may occur. Ventilation should be adequate in most cases, but certain operations at the place of use may require exhaust ventilation.
3. These resins are very low in toxicity under normal circumstances, and under reasonable conditions of use, they are not easy to cause harm to the human body: such as ingestion of the mouth and nose or with the eyes. Contact with skin, etc. However, it is recommended to use caution. Please use the following protective measures to ensure safety during operation: 1) The operator shall wear gloves with heat insulation protection; 2) Use the eye mask with thermal insulation layer to protect the eyes; 3) Wear an approved mask for mouth and nose for protection;
5. We encourage customers and potential users to use our products: 1) We will carefully review their application needs for such products and strive to meet their views on human health and environmental quality. 2) We also ensure that our products will not be used in the following ways: they are not assumed or untestable, but real and testable; 3) Our personnel will help customers deal with ecological and product safety issues, if necessary, your sales representative can arrange professionals to contact you appropriately.

Key words:

PA66

PA66 F6340G

None

威克特瑞